Blowgun

Spears, Atlatl, Bow, Throwing Sticks, Primitive Nets, Fishing Line, Hooks, etc.
Post Reply
User avatar
Pointman
Bush Wacker
Posts: 1015
Joined: Mon Jun 03, 2013 7:45 am
Location: Dallas, Texas

Blowgun

Post by Pointman »

I started making this blowgun based on Dave Canterbury's Common Man Blowgun design and decided to improve on it. Here's what I came up with. The first picture is sideways but you get the idea of the overall length of about 55".
You do not have the required permissions to view the files attached to this post.
User avatar
Pointman
Bush Wacker
Posts: 1015
Joined: Mon Jun 03, 2013 7:45 am
Location: Dallas, Texas

Re: Blowgun

Post by Pointman »

Here's the rest of the pics. It's made of two pieces of 1/2" PVC Sprinkler Riser pipe, the grey, thicker stuff that is threaded on both ends. I used a heat gun to heat up a 6" piece of 3/4" PVC to use as a coupler.
You do not have the required permissions to view the files attached to this post.
Last edited by Pointman on Wed Jun 05, 2013 4:49 am, edited 1 time in total.
User avatar
dragogt
Fair Weather Camper
Posts: 49
Joined: Sun Jun 02, 2013 3:40 pm

Re: Blowgun

Post by dragogt »

Gotta make me one of those..

Sent from my SGH-T989 using Tapatalk 2
User avatar
Pointman
Bush Wacker
Posts: 1015
Joined: Mon Jun 03, 2013 7:45 am
Location: Dallas, Texas

Re: Blowgun

Post by Pointman »

This goes with me everywhere. All I do is take the little sponge rubber dart keeper off and use it as a hiking stick since it is stiffer than regular PVC. Works for a tent pole too. It's all about multi function right?
Andre Crawford
Wet Tinder
Posts: 188
Joined: Mon May 27, 2013 12:18 am
Location: Killeen Texas

Re: Blowgun

Post by Andre Crawford »

You took that thing to a whole new level man.
Your not prepared if you can't remember what your carrying and where it is.
SilverBinder
Fair Weather Camper
Posts: 50
Joined: Wed May 29, 2013 10:29 pm
Location: Houston, TX

Re: Blowgun

Post by SilverBinder »

Awesome! I like the cammo touch.
"This is Liberty Hall - you can spit on the mat and call the "cat" a bastard!"
User avatar
twain55
Wet Tinder
Posts: 208
Joined: Tue Jun 11, 2013 9:45 am
Location: San Antonio, TX

Re: Blowgun

Post by twain55 »

Great work.
User avatar
Pointman
Bush Wacker
Posts: 1015
Joined: Mon Jun 03, 2013 7:45 am
Location: Dallas, Texas

Re: Blowgun

Post by Pointman »

SilverBinder wrote:Awesome! I like the cammo touch.
Thanks, I just grabbed a small oak leaf and used the silhouette to get the cammo effect. I was surprised how easy it was to do. I did the same thing for my homemade 60lb PVC bow and a few other things as well.
Post Reply